Click image to view full size image
Brief introduction:
XJL-300 Falling Weight Impact Testing Machines is used for impact test of plastic pipe, sheet metal and products to determine Anti-impact properties of these materials. This Falling mass impact testing machine is equipped with controller, which can ensure that figure setup, adjusting zero, raising hammer and dropping hammer automatically, and can be effective in preventing secondary impacts. It’s a necessary pvc pipe testing equipment for PVC pipe.
The Plastic pipes Falling mass impact tester has been operating in full compliance with ZBN72026 dropping hammer impact test machine technology standardsand meets standards of the test equipment requirements ISO 3127, ISO4422.
Main Technical Parameter
|
NO |
Technical Parameter |
Specification |
|
1 |
Max Impact Height |
2000mm |
|
2 |
Weight of the mass |
0.25kg～15kg increasing as per 0.25kg |
|
3 |
Specification of the mass |
R5， R10，R12.5，R25，R30，D25，D90 |
|
4 |
Height positioning error |
±2mm |
|
5 |
Max impact energy |
300J |
|
6 |
Supply and power |
A.C.220±10% 50Hz 0.5kW |
|
7 |
Dimension |
900×650×3800mm |
|
8 |
Weight |
500Kg |
Performance and function
1、Microprocessor controlled, LCD displayed
2、Use the keyboard to set the reference and lift to the given height and the real one
3、Falling mass can find the reference and lift to the given height automatically
4、With anti-second impact system
|
Relative devices low-temperature thermostat ● Use Freeze the test pieces at a constant temperature and work with the falling mass impact testing machine to make impact test. ● Technical parameters 1. Constant temperature: 0℃ to -25℃ 2. Internal dimensions: : 915x430x460mm 3. Weight: 100kg， 4. Power supply: 220v±10%, 50Hz |
|
E-mail: 